1. The maximum length of time for laying hens is no more than 17 hours. If the time is too long, it will consume electricity, and the chicken will be prone to fatigue. The damage rate of eggs will increase. Regardless of the arrangement of the lighting time, it must be ensured that the layer has a rest period of 8 hours of darkness. 2. Supplement the lighting time, the time to turn on and off the lamp should be regular. Don't change it to avoid disturbing the chicken's living habits, causing anxiety or even panic. The layer's illumination should be extended gradually and cannot be shortened. Otherwise, the egg production will decline. When the time of light increase is too fast, the poorly developed chicken will pass. Early production, resulting in anal prolapse, died early in the laying. 3. Increase the light and feeding system to organically combine. Feeding light alone will cause fatigue in feeds, especially in winter, when there is no material to eat under light, chickens continue to move and consume more energy, so care should be taken. 4. When light is applied, the elevation of the egg production rate must be adjusted. When the egg production rate rises naturally, the light increase time should be slow. If the egg production rises slowly or does not increase, the light time is increased; the light illumination level cannot be too strong or too weak, the power consumption is too strong, and it easily occurs. The proper function of light. 5. The specific lighting system should be "because chicken is suitable". No chickens of different ages can be kept in the same shed. Otherwise, the correct lighting system cannot be implemented. The requirements of different lighting of chickens are also different. Different chicken breeds have different feeding and management guidelines and should be combined with each chicken farm. Specific conditions can be used flexibly. Ningbo Wellway Optoelectronic Technology Co.,Ltd , https://www.wellwayopto.com
Adjust Chai Chicken Lighting 5 Note>
Next Article
Spike corn silage method
Prev Article
Feather processing