Full water processor to prevent clogging of the cooling water system

The entire water processor raises water safety issues to a safe level, and the entire water processor can overcome the water pollution gap.
The whole process water processor and multi-media filter are pre-treatment equipment for water purification equipment. The main function is to remove suspended matter and solid particles from water.
First, the general principle of the whole process of water processor selection:
1, the whole process water processor import and export path:
In principle, the inlet and outlet diameter of the filter should not be less than the inlet diameter of the matching pump, which is generally consistent with the inlet pipe diameter.
2, the full water processor nominal pressure:
The pressure rating of the filter is determined by the highest pressure that may occur in the filter line.
3, the choice of the total water processor hole mesh:
The main consideration is the particle size of the impurities to be intercepted, depending on the process requirements of the media process. The size of the screen that can be intercepted by various specifications of the screen can be found in the table below.
4, electronic water processor material:
The material of the filter is generally selected to be the same as the material of the connected process pipe. For different service conditions, filters of cast iron, carbon steel, low alloy steel or stainless steel may be considered.
5, the whole process water processor filter resistance loss calculation:
The water filter has a pressure loss of 0.52 to 1.2 kPa at a generally calculated rated flow rate.
The whole process of water processor steel: used for raw material field, water treatment and filtration of sintering pellet plant, cooling water filtration of blast furnace, rolling mill, continuous casting machine, etc., impurity filtration of high pressure water phosphorus removal system.
Full-range water processor car: coating production line, widely used in automotive, tractor, motorcycle, engine manufacturing water, processing systems.
The whole process of water processor power plant: used for the precision pretreatment part of high-purity water preparation of power plant boilers, the filtration of generator cooling water and sealing water, which can be used as the side filter treatment when the water consumption of the 13-4 system is extremely large.
The whole process of water processor petrochemical industry: side filter treatment in the circulating water field, can be single or multi-machine parallel main treatment, instead of filter material filtration, reduce filter material filtration load, can avoid a lot of washing water consumption, saving costs.
　　 The whole process of water processor agricultural garden and paper mill: in the nozzle and nozzle system, equipment clogging and wear caused by impurities should be reduced, so it is necessary to select high-precision, high-automatic filtration products machinery, food or other: automatic system , precision filtration, to prevent blockage of the cooling water system.

Styrene Acrylic Copolymer

2. Specifications:

4. Use Method:

The product is weak cationic, it can be used with cation and nonionic additive, such as cationic starch,basic dye and polyvinyl alcohol etc, but cannot be mix used with additive of strong cation.

The consumption of the product depends on the quality of base paper, internal sizing and size resistance. It is usually 0.5-2.5% of oven dry weight.

5. Package and storage:

200KG or 1000KG plastic drums.

The storage period is 6 months below the temperature 5-35℃,keep away from sunlight and frost.

Styrene Acrylic Copolymer,Cationic Styrene Acrylic Copolymer,Anionic Styrene Acrylic Copolymer,Sizing Agent For Corrugated Paper

Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com