Weighbridge, electronic platform scale, weighbridge manufacturer--how to use the junction box

Weighbridge, electronic platform scale, weighbridge manufacturer--how to use the junction box

2018-1--24 Jiujin Weighing Apparatus Factory

Pay attention to the use of the weighbridge junction box:

1: When you are using the adjustment input power junction box. And the wire turns in the signal cable are 0.2mm (or 0.4mm). Then the signal cable length should be less than 10M (or 20m) to be analogous, so as to avoid excessive pressure drop and affect the angular error adjustment.

2. Wiring Note: The core wire copper wire is not peeled off 607MM, and the corresponding wire 正确 is correctly connected after tightening. The strength of the copper wire strand is tightly pressed to ensure the long-term reliability of the conductivity.

The components of the weighbridge have their respective roles, as follows:

1. Load cell ---- Function: Converts the weight signal added to the scale into a proportional electrical signal output.

2. Weighing display instrument -- Function: The analog signal output by the sensor is amplified, filtered, A/D converted, digitally processed and displayed on the display.

3. The scale body part -------- bearing part, the mechanical structure can also be divided into weighing platform, displacement limit, unloading 锣 bolt, junction box, signal cable and so on.

4. External device ----- refers to the device that connects to the signal output port of the display instrument and receives the output signal of the instrument; common external devices include printer, large-screen display, computer management system; in addition, analog output, optical output , solid state relay output, etc.

Shrimp Processed Products

Vacuum packed Shelled shrimps,Vacuum packed shrimps,Fast Food Dried Shrimps

Zhejiang ocean family co.,ltd , https://www.ocean-family.com