How to use the crusher correctly

1. The crusher and power unit should be firmly installed.

2. After the crusher is installed, check the tightening condition of the fastener. If loose, tighten it. At the same time to check the tightness of the belt is appropriate.

3. Before starting the crusher, first turn the rotor by hand to check whether the claws, hammers and rotors are flexible and reliable, whether there is a collision in the shell, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, power machine and crushing. Machine lubrication is good.

4, do not feel free to replace the pulley.

5, after the start of the crusher should idle 2-3 minutes, no abnormal phenomenon after the feeding work.

6, the work should always pay attention to the operation of the grinder. Feeding should be even to prevent obstructing stuffy cars and not overloading for a long time. If any vibration, noise, excessive bearing and body temperature, external spray, etc., are detected, the machine should be shut down immediately for inspection.

Heavy Industry Use Clothing

High Visibility Clothing,Flame Resistant Clothing,Disposable Protective Clothing,Protective Coverall With Hood

Taizhou huangyan Yiman industry & trade limited , https://www.yimancoverall.com