Weighbridge, electronic platform scale, weighbridge manufacturers introduced the situation of weighing instability

Weighbridge, electronic platform scale, weighbridge manufacturers introduced the situation of weighing instability

2018-3-6 Jiujin Weighing Apparatus Factory

principle:

The vehicle enters the scale countertop. The elastic body of the inner load cell of the scale body is deformed under the gravity of the vehicle itself. The impedance of the resistance strain gauge bridge on the elastomer changes, and the electrical signal proportional to the weight value is output. The corresponding data is processed by the amplifier and A/D converter inside the sensor, and the digital signal is output, and the digital signals of each sensor are wired. The box enters the weighing display and the meter displays data such as weight.

constitute:

The electronic truck scale consists of weighing instruments, sensors and scales. The weighing instrument can print data to an external printer. You can also connect to the computer to report the statistics of the year, month and day, and display the large screen. Docking financial software for settlement.

Device:

Optional no foundation pit installation or shallow foundation pit installation. No matter which installation method. Make sure the truck scale is not submerged. Adequate access should be reserved at the entrance of the truck, and all drainage facilities should be provided. Make sure the vehicle goes straight into the weighing platform. The distance between the scale body and the meter should not be good at 25 meters, ensuring accurate signal transmission.

First, the installation of the scale body, of course, this refers to the electronic platform buried in the ground, if the beginning of the installation of the platform is not stable, not at a 90 degree angle to the ground. Then the force will definitely have an impact. There is also a single layer of small weighbridge placed on the ground. When it is placed, it must be adjusted after the four corners are stable. It is often found that some factory operators forklifts are forked and placed in a work area. Just take a reading and put it to another place after reading it. I thought this would save work efficiency, but I don't know if I will do a lot of repetitive work later. There is even the danger of fried squid.

Second, the weighbridge, electronic floor scale sensor often hits in use, which affects normal use, and there is a thunderstorm weather electronic scale placed outside, there will be a chance of lightning strikes, so keep it safe.

Note: At the end of the lawsuit, we must use the electronic weighbridge to ensure that the installation level is maintained, and use as much as possible. In this way, the efficiency of the electronic platform can be greatly maintained. The weighbridge is also in need of maintenance, otherwise its accuracy will be affected.

Disposal Medical Supply

Medical Equipment Disposal,Syringes Needles Sizes,Disposable Syringe,Insulin Syringe

FOSHAN PHARMA CO., LTD. , https://www.fs-pharma.com