The purpose and working principle of ultrasonic bottle washer

Ultrasonic bottle washer is a new double-end bottle washer that is innovated and developed on the basis of digesting and absorbing foreign similar products. It has the world's advanced level in the 1990s. Suitable for the washing of new glass bottles or recycled bottles by beer and beverage manufacturers. However, the user cannot use the machine for washing dirty bottles that have been used for other purposes (such as paint, grease, pesticides, kerosene, etc.). Since the design of the machine is a double-end form and a bottle washing process, the contamination of the washing bottle is greatly reduced. Therefore, this machine is more suitable for the requirements of the pure draft beer bottling line.

1. The overall structure consists of variable frequency synchronous transmission system, in and out bottle conveyor chain mechanism, in and out bottle transmission mechanism, sprinkler system, descaling mechanism, heating system, piping system, cabinet and cabinet accessories, control system, console and sidewalk And so on.

2. Working procedure The bottle to be cleaned is conveyed to the feeding table via the conveyor belt. The partition on the feeding table divides the bottle into 44 rows and sends it to the rotating bottle pushing plate. The bottle pushing plate pushes the bottle into the bottle holder. In the bottle box, the movement of the bottle holder enters the box, and then enters the preheating spray, and the residual liquid in the bottle is poured into the drain tank and discharged outside the box. The bottle holder enters the tank of alkali I, II and III, so that the bottle is fully soaked and sprayed, and then immersed in the hot water tank to dilute the lye of the bottle holder and the bottle, and then fixed by hot water, warm water and clear water. Spray and dry the spray in the bottle, then dry it, and send it to the bottle-out device at the bottle end. The bottle push-out plate unloads the bottle discharged from the bottle into the bottle chain to complete the whole bottle washing process. In the process of washing the bottle, the outer descaling device provided in the alkali I, II, and III tanks respectively removes the standard paper and the foreign matter in the alkali tank.