The correct detailed operation method of the experimental spray dryer

The correct detailed operation method of the experimental spray dryer
1. Peristaltic pump: Click “Open”, the peristaltic pump “Start”, then click “Stop” to close.. Automatically control the operation of the peristaltic pump, click the peristaltic pump auto button green (the button changes to “Start”), the peristaltic pump automatically Start, according to the set value of the outlet air temperature, adjust the speed of the peristaltic pump, thereby adjusting the feed amount of the peristaltic pump, so that the spray effect is good.

2. Fan: Control the start and stop of the fan, click the fan button area (above), the fan starts (the button moves to “start”), click below, the fan stops (the button moves to “stop”).
3. Through needle: control the start and stop of the needle, click the green area (above) through the button, start the needle (the button moves to “start”), click below, stop (the button moves to “stop”), the needle The running speed is changed in the interface (3) by changing the set value set by the pass pin. It is set at the factory and generally does not need to be changed.
4. Air compressor: control the start and stop of the air compressor, click the air compressor button green area (above), the air compressor starts (the button moves to "start"), click below to close.
5. Heater: control the start and stop of the electric heater, click the heater button green area (above), the heater starts (the button moves to “start”), click below, the heater stops (the button moves to “stop”) .
Note: The heater will not start until the fan is started. After the heater is turned off, the inlet air temperature is less than 30 degrees and the fan is automatically turned off.
6. Fan setting: Set the rotation frequency of the extension, press the value box to pop up the numeric keypad, press CLR to clear the number, then input the desired value, press ENTER to modify it.
7. Peristaltic pump manual: manually control the operation of the peristaltic pump, click the peristaltic pump auto button green area (above) (display ON), the peristaltic pump starts automatically, click below, the peristaltic pump stops (displays OFF)
8. Set the needle through: the running frequency of the needle, the value represents a few seconds to start, press the value box, pop up the numeric keypad, press the CLR button to clear the number, then enter the desired value, press ENTER to modify After the completion, the game has set the value of zui, no need to set it separately.
9. Peristaltic pump setting: set the feed amount of peristaltic pump ml/h), press the value box to pop up the numeric keypad, press CLR to clear the number, then input the desired value, press ENTER to modify it.
10. Description: Click on the control panel to enter the interface (2) and enter the temperature setting interface.
11. Inlet air temperature self-tuning tuning: adjust the inlet air temperature stability. If there is a large fluctuation between the inlet air temperature display value and the inlet air temperature setting value when drying, the inlet air temperature is automatically tuned. To ensure that the inlet air temperature setting is consistent with the inlet air temperature display value. (The observable temperature curve window has a green curve, and the curve tends to a straight line and the temperature is accurate.
When the temperature is still inaccurate, click the auto-tune button and the inlet air temperature will start automatically.
After the self-tuning is completed, it will automatically end.
12. Inlet air temperature setting value: set the inlet air temperature, press the value box to pop up the numeric keypad, press the CLR button to clear the number and input the desired value, press ENTER to modify it.
13. Inlet air temperature display value: display the actual value of the inlet air temperature
14. Outlet temperature display value: shows the actual value of the wind temperature
15. The outlet temperature is self-adjusting: When the outlet temperature is self-adjusting, the temperature curve window will have a red curve. When the curve tends to a straight line, the outlet temperature

The correct detailed operation method of the experimental spray dryer

Frozen seafood mix

Frozen Bag Of Mixed Seafood,Frozen Seafood Mix Bag,Mixed Frozen Fish,Bag Of Mixed Seafood

Zhejiang Zhoufu Food Co., Ltd. , https://www.zhoufu-food.com