The second is the trial run-in. After purchasing a new machine, do not carry the load operation immediately. Follow the requirements of the instruction manual to perform the test run-in. After the wear is completed, the machine oil filter and the residual impurities in the oil are cleaned. If necessary, the oil must be replaced and the oil pan cleaned. The third is not overworked. When operating the new machine, it must be done strictly in accordance with the requirements of the manufacturer's instructions. No overloading, no speeding, no overfeeding, no long-term overloading. Fourth, it is not possible to modify the new machine at will and increase the engine speed arbitrarily. In order to make the machine run fast, some users can adjust the fuel supply and pressure of the high-pressure pump arbitrarily. Some of them also tie up the speed-control spring with iron wire, which has a greater potential safety hazard.
Advantages
Imported raw materials from German to stable product quality.
We uphold integrity and strict quality control,and the export rate of return of zero.(peers3.5%)
Lot number, manufacture date,use by/expiry date are printed clearly on the box and label.
We have a system for recording production bath numbers and tracking product after-sales problems.
Keto Strips Amazon,Keto Mojo Test Strips,Keto Mojo Ketone Levels,Keto Mojo Glucose Strips Changchun LYZ Technology Co., Ltd , https://www.lyzinstruments.com
Pay attention to the use of new agricultural machinery before use
One is reading the instructions. After purchasing the new machine, before the engine is used, it is necessary to carefully read the instruction manual of the machine. Special attention should be paid to the use of the diesel oil of the specified grade. Precipitation and filtration should be sufficient before use, and the oiler should be kept clean. Lubricants should be kept clean, enough oil should be added, and they should be replaced regularly. The grades used should be consistent with the regulations. The air filter should always pay attention to maintenance, pay attention to the addition of cooling water, especially not to make the engine work in a water shortage. Always pay attention to check and tighten the relevant bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft and the lock nuts on the flywheel, and the fastening nuts on the wheels.
Next Article
Sunflower Verticillium Wilt Symptoms