Jujube garden density renovation project to improve the rate of red jujube commodity

Jujube garden density renovation project to improve the rate of red jujube commodity

During the interview, Wan Xingxue told reporters that the orchard of his own family had been reformed according to the requirements of sparse planting, but some jujube farmers were still worried about the transformation of their own “old orchard”. Zao farmers wanted to know what should be paid attention to when raising the rate of jujube commodity. ?

Wang Guoqiang, a researcher at the Autonomous Region Academy of Agricultural Sciences, said that the development of jujube trees is conducive to improving the quality and efficiency of jujube trees, improving the standardization and industrialization of jujube, improving the quality of fruit and increasing farmers' income.

On March 15, 2019, the General Office of the People's Government of the Autonomous Region issued the "Notice on Further Promoting the Construction of Quality and Efficiency Improvement Projects for Characteristic Forest Fruits and Fruits" (hereinafter referred to as the "Notice").

The "Notice" requires that the dense planting of the dense planting garden should be carried out, and the sparse renovation of walnut and red jujube densely planted gardens should be taken as a revolutionary measure to accelerate the transformation of the "old orchard" and "mixed orchard" and increase the rate of fruit products.

Wang Guoqiang said that the "Notice" from the full implementation of forestry cultivation management measures, solidly grasp the construction of the forest fruit science and technology demonstration park, strengthen the construction of the forest fruit science and technology service system, further optimize the structure of the forest fruit industry, seriously solve the problem of orchard intercropping and strengthen organizational leadership and supervision The six aspects of the inspection put forward specific requirements.

According to the age of the tree and the row spacing of the jujube garden, according to the principle of not being dense, not dense, and then sparse, the sparseness should be sparse and sparse, the orchard seriously affecting the ventilation and light conditions and the quality of the fruit. (Where the walnut is more than 10 years old, the density is more than 22 plants/mu; the jujube tree is more than 5 years old, and the density is more than 110 plants/mu.) The file is set up, the task of clearing and reconstructing the work is clear, and the plant is dredged and dredged. ,sparse

Technical measures such as branching, high control, and expansion of the crown, the walnut garden and the red jujube garden were gradually transformed into 22 plants/mu and 55 to 110 plants/mu in a reasonable density cultivation mode to thoroughly improve the ventilation and light transmission conditions of the orchard. At the same time, measures such as supplementing the lack of plants, changing the head, and improving the variety will be adopted to accelerate the transformation of the “old orchard” and “mixed orchard” and increase the rate of fruit products.

To ensure the high quality and good price of fruit, we must also do the leveling of jujube garden, plastic pruning of jujube trees, management of fertilizer and water, prevention and control of pests and diseases, and do a good job in harvesting and classifying and classifying fruit.

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Patient Monitor

Features
10.1 inch high resolution color TFT display
Lightweight and portable design suitable for Ambulance,Emergency Transport
Three Working Modes : Monitoring , Surgery and Diagnosis.
Simple and friendly operating display interface.
Multi-display modes suitable for different applications: Standard Interface , Large font , ECG Standard Full Display ,OXY, Trend able BP Trend.
Built-in high capacity battery up to 3 hours of continuous work


Technique Specification
ECG

Lead Mode : 5 Leads ( I , ll , Ill , AVR , AVL , AVF , V )
Gain : 2.5mm / mV, 5.0mm /mV , 10mm /Mv, 20mm /mV
Heart Rate : 15-300 BPM ( Adult ) ; 15-350 BPM ( Neonatal )
Resolution : 1 BPM
Accuracy : ± 1%
Sensitivity > 200 uV ( Peak to peak )
ST measurement range : -2.0 ~+ 2.0 Mv
Accuracy : -0. 8mV~+ 0. 8mV : ± 0. 02mV or ± 10% , which is greater
Other Range : unspecified
Sweep speed : 12.5 mm / s , 25mm / s , 50mm / s
Bandwidth:
Diagnostic : 0.05~130 Hz
Monitor : 0.5~40 Hz
Surgery : 1~20 Hz

SPO2
Measuring Range : 0 ~ 100%
Resolution : 1%
Accuracy : 70%~100% ( ± 2 % )
Pulse Rate : 20-250 BPM
Resolution : 1 BPM
Accuracy : ± 3 BPM

Optinal Parameters :
Central monitoring system
Dual IBP
Etco 2
12-lead ECG
Nellcor SpO2
Sun Tech NIBP

NIBP
Method : Oscillometry
Measure mode Manual, Auto, STAT
Unit : mmHg , kPa
Measure and alarm range:
Adult Mode
SYS 40 ~ 280 mmHg
DIA 10 ~ 225 mmHg
MEAN 20 ~ 240 mmHg

Pediatric Mode
SYS 40 ~ 220 mmHg
DIA 10 ~ 160 mmHg
MEAN 20 ~ 170 mmHg

Neonatal Mode
SYS 40 ~ 135 mmHg
DIA 10 ~ 100 mmHg
MEAN 20 ~ 110 mmHg
Resolution : 1 mmHg
Accuracy : ± 5 mmHg

TEMP
Measure and Alarm Range : 0 ~ 50 C
Resolution : 0 . 1C
Accuracy : ± 0 . 1C

Standard Parameters
ECG, RESP, TEMP, NIBP, SPO2, PR

RESP
Method : Impedance between RA-LL or RALA
Measurement Range:
Adult : 10~120 BrPM
Neonatal / Pediatric : 7~150 BrPM
Resolution : 1 BrPM
Accuracy : ± 2 BrPM

Standard Configuration
No Item Qty

  1. 1 Main Unit 1
  2. 2 5-lead ECG cable 1
  3. 3 Disposable ECG Electrode 5
  4. 4 Adult Spo2 probe 1
  5. 5 Adult NIBP cuff 1
  6. 6 NIBP extension tube 1
  7. 7 Temperature probe 1
  8. 8 Power Cable 1
  9. 9 User Manual 1
  10. 10 Fuse 3


Patient Monitor,Portable Patlent Monltor,Patlent Monltor For Adult,Patlent Monltor For Baby

Guangzhou Sonostar Technologies Co., Limited , https://www.sonoeye.com