Column type vegetables without soil cultivation

Column cultivation is a kind of soilless culture. This cultivation is to allow the cultivation to develop into a space through the erection of pillars without affecting the cultivation of the plane. It makes full use of the greenhouse space and solar energy, and can improve land utilization and greenhouses. Facility utilization has become resource-efficient agriculture and factory-efficient agriculture.

First, the nutrition tank

The nutrient solution tank is a device for storing a nutrient solution, which is generally a subterranean brick mud structure. Since the nutrient tank needs to be installed with a pump, it must be used where there is a power supply. The volume of the nutrient solution tank needs to be designed with a standard of 15-20 tons of water per acre of water culture area.

In order to make the nutrient solution tank watertight, watertight and non-returnable, anti-seepage material must be added, and waterproof material should be applied on the inner wall of the tank. In addition, a small 20cm square water tank should be installed at the water pump to facilitate the cleaning of the tank.

Second, plane cultivation bed

1. Bed body The bed is a device for growing nutrients and planting crops. It is made of polyphenylene. Specifications are: length 75 cm, width 96 cm, height 17 cm. In order not to allow the nutrient solution to leak and protect the bed, a black film with a thickness of 0.15 mm and a width of 1.45 meters was placed inside.

2. The cultivation plate cultivation plate is used to fix the root of the crop, prevent light from entering and dust, prevent the generation of algae, and keep the temperature of the nutrient solution stable. The cultivation board is also made of polystyrene board, which is 89 cm long, 59 cm wide, and 3 cm thick. The planting holes with a diameter of 3 cm are arranged on the top and the hole spacing is 8 cm.

3. Plane cultivation and drainage device and nutrition liquid circulation Plane cultivation bed liquid supply device is composed of water pump and iron or plastic liquid plus main pipe and liquid addition pipe, and nutrient solution can flow from the small hole into the cultivation bed. The way to replenish the nutrient solution is to pump the nutrient solution from the tank first, and then enter the cultivation bed by adding the main pipe and adding the branch pipe to maintain the water level of 5-8 cm. The nutrient solution that is higher than the discharge port, the liquid outlet port goes back to the nutrient tank through the drainage channel, and completes the planar circulation.

4. The column of cultivation column is used to support and fix the carrier of the cultivation plant and the drip box. The column consists of cement pier and iron pipe. The concrete pier is 15 cm square in size and buried underground on both sides of the hydroponic bed to fix the pillar iron pipes. The distance between the piers is 90 cm, the diameter of the iron pipes is 25-30 mm, and the length is about 2 meters. The material is made of thin-walled iron pipes. Or hard plastic pipe can be. Insert the lower end of the tube into the hole in the cement pier.

5, column cultivation é’µ cultivation é’µ plant is a planting plant on the column. The shape of the cultivars developed by the Beijing Vegetable Research Center is a hollow, six-valve body. Its specifications are 20 centimeters high, 20 centimeters in diameter, and 10 centimeters apart. The wolfberry is filled with pellets (a type of rock wool). 6 petals were planted at 6 petals. 8-9 cultivars were staggered into columns by staggering the petal positions.

6. Liquid-adding liquid back system for column cultivation This system is composed of 4 parts: water pump, adding liquid main, adding liquid branch, and drip box. The dosing main is a 40-50 mm hard drip irrigation tube. The liquid addition pipe is a 16 mm non-porous hard drip irrigation pipe. There are two hollow short handles at both ends of the drip box, which are used to connect the liquid addition pipe. There are 6 small holes around the bottom of the box to make nutrient solution flow down. The center of the bottom of the drip box is fixed above the column. The nutrient solution is pumped out of the tank by a water pump, enters the drip box through the liquid addition pipe and the liquid addition pipe, flows into the cultivation pot from the drop box, passes through the small hole at the bottom of the cultivation pot, flows into the second cultivation pot, and flows downstream. Go to the bottom of a cultivation barn, and then flow into a flat water culture bed, and then return to the nutrient solution tank to complete a cycle. In order to achieve automation, the pump can be connected to a timer and the timer controls the dosing time.

Pillar cultivation is a new cultivation method. The currently tested varieties include leafy vegetables such as Hyacinthus radix, Artemisia scoparia, erect lettuce, rapeseed, and clover.

Disclaimer: Some articles in this website have been transferred from the Internet. If you are involved in third party legal rights, please inform this website. phone

Zoom Bullet Camera

The Zoom Bullet Camera means that the Zoom Bullet Camera/ Zoom Bullet Network Camera/ Waterproof Zoom Bullet Cameras/ Zoom Bullet Camera CCTV/ Zoom Bullet Surveillance Cameras/Infrared Bullet Zoom Cameras belongs to not only the Zoom Camera but also the Bullet camera. We have introduced the basic features of the Bullet Camera before, so this time let me introduce the maintenance skills of the Bullet Camera(including th Zoom Bullet Camera)for you.

The maintenance skills of the Zoom Bullet Camera

1. The basic conditions to maintain the Zoom Bullet Camera
The basic maintenance conditions required for the normal equipment maintenance of the Zoom Bullet Camera
system are the "four complete". That is, the complete spare parts, complete accessories, complete tools, and
complete instruments.

1) Complete spare parts
Generally speaking, the corresponding spare parts library(which mainly stores some important equipment that is not easy to repair immediately after damage, such as the Bullet Cameras , lenses, monitors, etc.) must be established for the the maintenance of each system. Once these equipment fails, the system may not operate normally and must be replaced in time. Therefore, a certain number of spare parts must be available, and the inventory of the spare parts library must be continuously updated according to the repairability of the equipment and the characteristics of the operating cycle of the equipment.

2) Complete accessories
Accessories are mainly the additional configuration of the various discrete components and modules in the equipment, which are mainly used for equipment maintenance and to prepare more accessories would be better. The commonly used accessories mainly include various integrated circuit chips and circuit discrete components, required by the circuit. Other larger equipment must be equipped with the certain functional modules for the emergency use. In this way, a lot of expenses for updating equipment can be saved with a small investment.

3) complete tools and testing instruments
The Zoom Bullet Camera must be equipped with the common maintenance tools and inspection equipment, such as various pliers, screwdrivers, electric test pens, electric soldering irons, adhesive tape, multimeters, oscilloscopes, etc. If necessary, the user should also make some testing tool such as the simulated load.

2. The specific maintenance skills of the Zoom Bullet Camera

1) Dust and clean the equipment once a quarter to ensure the normal operation of the machine. Meanwhile, check the ventilation, heat dissipation, dust removal, power supply and other facilities of the monitoring room. The outdoor temperature should be -20℃~+60℃, the relative humidity should be 10%~100%; the indoor temperature should be controlled at +5℃~+35℃, and the relative humidity should be controlled at 10%~80%, make the monitoring equipment in a good operating environment.

2) According to the instructions of each part of the Zoom Bullet Camera system, check the technical parameters and the quality of the transmission line of the monitoring system every month, handle the hidden troubles, and assist the monitoring supervisor to set the various data, to ensure the good condition and normal operation of this equipment' each part' functions.

3) Thoroughly inspect the parts of the Zoom Bullet Camera equipment that are prone to aging once a month. Once the aging phenomenon is found, it should be replaced and repaired in time, such as the video head.

4) Maintain the monitoring equipment that works for a long time regularly once a month.

5) Monitor the operation of the Zoom Bullet Camera system and equipment, analyze the operation, find and

troubleshoot in time.

6) Optimize the Zoom Bullet Camera system and equipment regularly every month.

7) Provide the monthly regular information service: for example, on the first working day of each month, last month's repair and maintenance records should be submitted to the person in charge of the monitoring center, in the form of electronic files.

Zoom Bullet Network Camera, Waterproof Zoom Bullet Cameras, Zoom Bullet Camera CCTV, Zoom Bullet Surveillance Cameras, Infrared Bullet Zoom Cameras

SHENZHEN SANAN TECHNOLOGY CO.,LTD , https://www.sanan-cctv.com